Everfocus EMV1200/500 12 Channel Mobile DVR with 500GB, H.264, and Surge Protection

Compare

Description

  • Provides regulated 12VDC camera power for 12 cameras; interface cables to power jacks supplied

    • Optional External EDGE/GPRS/CDMA/WI-FI Modules for cellular/specialized wireless Transmission

    • GPS function tracks speed and geographic limits (optional external GPS receiver)

    • Power Supply: 10V~36VDC with Surge Protection, Voltage Regulation, programmable Delay on/off Delay on protects equipment from starter motor power surge; delay off allows recording even after ignition has been turned off

    • Temperature: -40°F~131°F (Operating), -40°F~185°F (Non-Operating)

    • System warnings: System fail LED, HDD full, HDD/Sys Temp, Fan fail, HDD fail LED, HDD power off, HDD failure

    • Email Alert: Multiple email notifications in response to aal rms and events. (Requires real time network connectivity though cellular or WiFi service)

    • Event Alarm: Fan failure, hard disk temperature, hard disk failure, hard disk full, hard disk removed, power loss (after power is restored), network loss, GPS loss, GPS speed, GPS fencing, G sensor limits

    • Watchdog Function: Reboots DVR automatically if required 

    • Video Format

      NTSC/PAL (auto detected by system)

      Operating System

      Embedded Linux with special small monitor friendly GUI

      Video Input

      12 channels (vibration resistant locking Molex connectors- Interface cable to BNC-F supplied: 3x groups of 4 cameras

      Video Output

      Main Monitor: 1 composite BNC (rear) /1 RCA output, (front) Call Monitor: 1 composite BNC (rear)

      Video Compression

      H.264

      Video Display

      Full, 4/9/12, Sequence

      Recording Resolution

      NTSC: 720×480/720×240/360/240  PAL:720×576/720×288/360×288

      Audio Inputs

      12 line in (vibration resistant locking Molex connectors- Interface cables to RCA-F supplied: 3x groups of 4 cameras each)

      Audio Outputs

      1 front panel RCA line out, 1 rear panel RCA line out

      Alarm Inputs

      12 alarm inputs (vibration resistant locking Molex connectors- interface cables supplied)

      Alarm Outputs

      2 alarm outputs (form “C”; contacts rated at 30V AC/DC @ 1 amp-interface cables supplied)

      Storage

      One 2.5″ HDD (up to 2TB)

      Recording Rate

      NTSC: D1 120FPS, 2CIF 240 FPS, CIF 480 FPS (duplex)  PAL: D1 100FPS, 2CIF 200 FPS, CIF 400 FPS (duplex) (Per camera resolutions and record rates can be set individually per camera through the OSD menus up to the maximum record capacity of 480 NTSC/400 PAL CIF equivalent FPS)

      Recording Mode

      Continuous recording, event recording, continous + event recording (Rate and resolution in each mode set independently per camera)

      Recording Quality

      Adjustable in five levels per camera per Record Mode

      Pre-Alarm Recording

      Optional; 5 second interval

      Playback Rate

      NTSC: D1 120 FPS, 2CIF 240 FPS, CIF 480 FPS  PAL: D1 100 FPS, 2CIF 200 FPS, CIF 400 FPS

      Playback Search

      Time/date, event search

      Video Loss Detection

      Yes

      G Sensor

      Embedded 3-axis G Sensor; data recorded; alarm if separate user limits for X/Y or Z axis exceeded

      GPS Function

      Optional External GPS Sensor for speed and geographic limit alarms (rectangular or circular fencing)

      Configuration Method

      On Screen menu with ‘portable monitor friendly’ GUI

      Control/Setup

      IR remote control, USB mouse, network I/F

      Real Time Clock

      Can be synchronized to GPS/NTP time source; flexible DST settings

      Networking

      RJ45 socket, 10/100 Mbps; 802.11b/g WiFi with diversity antennas TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP

      File Export

      USB 2.0 interface

      Interfaces

      RS-232 x 2, RS-485, USB x 3, GPS port

      Power Source

      10V~36VDC (built in surge protection, voltage regulation, programmable Delay On/Off relative to ignition or other switched voltage)

      Power Consumption

      6.5A max @12VDC supplying 4.8A to cameras

      Camera Power Outputs

      Total current 4.8 amps@ 12VDC (vibartion resistant locking Molex connectors-interface cable provided to coaxial power plugs: 3 X groups of 4 cameras); 1.2A for camera 1~4 and 3.6A for camera 5~12

      Dimensions (LxWxH)

      260 x 210 x 70mm/ 10.24″ x 8.27″ x 2.76″ (w/out mount bracket) 313.5 x 260 x 97.8mm/ 12.4″ x 10.2″ 3.9″ (w/mount bracket)

      Weight

      3.2 kg/ 7.05 lbs. w/out mount, 3.65 kg /8.05 lbs w/ mount

      Operating Temp

      Working Temperature: -40°C~55°C/ -40°F ~ 131°F  Storage Temperature: -40°C~85°C/ -40°F~185°F